Industrial arc brazing/welding dust collectors and fume extractors

Industry Arc Brazing/Soldering Dust Collector And Smoke Extractor Working principleCleaning: when dusts accumulate continuously on filter cartridge\'s layer surface, the pressure difference between it\'s interior and exterior will increase steadily, when the pressure difference reach pre-set value(1000-1500Pa), the pulse va

Featured Products

Industry Arc Brazing/Soldering Dust Collector And Smoke Extractor 
Working principle
Cleaning: when dusts accumulate continuously on filter cartridge's layer surface, the pressure difference between it's interior and exterior will increase steadily, when the pressure difference reach pre-set value(1000-1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge's layer surface, dusts fall into dust collector under gravity, thus the whole cartridge's layer surface is cleaned.

Industry Arc Brazing/Soldering Dust Collector and Smoke Extractor



Product introduction
Incorporated world leading environmental technology, double working bay double filter cartridge fume purifier is a technically advanced industrial dust & fume purifier, it's developed with full consideration of the forming, characteristics and harm of fume and based on actual conditions of cutting and welding workshop.

This purifier can be automatically cleaned and manually cleaned, automatically cleaning is as following:
1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation pulse blow cleaning.
2. When the fan stops working, the system will implement interval rotation pulse blow cleaning for three times.

Industry Arc Brazing/Soldering Dust Collector and Smoke Extractor

Main feature

1. Suction arm can be rotated 360° horizontally, according to actual working condition, suction volume can be adjusted by adjusting volume valve in suction hood.
2. PTFE coating(highly effective glass fiber)micro particle filtration, filtration efficiency reaches 99.99%, meanwhile maintain a high air flow

3. purifying dry, oil-free, non-corrosive fume mixture generated in cutting and welding, collecting rare metals and valuable materials

Technical parameters
Noitemparameter
1fan typeKSJ-0.7B
2treatment of air flow1000m3/h
3motor power1.1kw
4power supply220V/50Hz or 115V/60Hz
5filtration area15m²
6number of filter cartridges3pieces
7filter mediumPTFE coating filter material/(highly effective glass fiber)
8filtration efficiency>99.9%
10compressed air0.5~0.6 MPa
11maximum pressue1900Pa
12noise68±5dB(A)
13weight138±5KGS
14dimensions(excluding suction arm)660×760×1200mm
 ExhibitionIndustry Arc Brazing/Soldering Dust Collector and Smoke Extractor

Company profile
Industry Arc Brazing/Soldering Dust Collector and Smoke Extractor
Industry Arc Brazing/Soldering Dust Collector and Smoke Extractor

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours