Mine bag filter Cement plant dust collector

Bag filter cement plant dust collector for mining Product IntroductionCNMC type bag filter has much simpler structure and much smaller footprint compared with other pulse cleaning filtration systems. Very short cleaning time does not affect filtration work.It is one of the most commonly used dust collectors. Widely used for

Featured Products

Bag filter cement plant dust collector for mining 

Product Introduction


CNMC type bag filter has much simpler structure and much smaller footprint compared with other pulse cleaning filtration systems. Very short cleaning time does not affect filtration work.

It is one of the most commonly used dust collectors. Widely used for dust collection during crushing, packing, lifting, conveying and other process producing powders.Its application includes cement plant,powder washing plant, composite floor plant.

Bag Filter Cement Plant Dust Collector for Mining

 

Feature:

1. It has modern design, it uses lower gas inlet structure, the rough high temperature granules directly drop to the dust hopper and effectively protects the filter bag.

2. It uses long filter bags and it has smaller floor area in case of equal processing capacity, therefore it is more convenient for reconstruction of old factories.

3. It uses separate chamber offfline dust clearingwith high efficiency and few secondary flour dust attachment, in the meantime, it can effectively reduce the equipment energy consumption, the fatigue level of filter bag and pulse valve is correspondingly reduced and the service life of filter bag and vane is prolonged by several times and equipement operation cost is remarkably reduced.

4. The overhaul and bag replacement can be carried out for separate chambersunder the condition that system blower and system run normally.

5. The filter bag inlet used spring tension structure, it is convenient to disassemble & assemble and it has good tightness.

6. The case uses airtightness designand it carries out leak detecting with oil and reduces air leak to the maximum extent.

7. The whole set of equipment is controlled by PLCto realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.


Bag Filter Cement Plant Dust Collector for Mining

Dust Collector's parameter:

Model

PPC128-6

PPC128-9

PPC128-10

PPC128-2×6

PPC128-2×7

PPC128-2×8

Volume(m³/h)

67300

100900

112100

134600

157000

179400

Air speed(m/min)

1.2-2.0(Speed varies at different dust points)

Filtration aream2)

935

1402

1558

1869

2181

2492

Net filtration area(m2)

779

1246

1402

1713

2025

2336

No. of bag(pc)

768

1152

1280

1536

1792

2084

Resistance(Pa)

1470-1770

Minus pressure(Pa)

7000

Dust content at inlet(g/m³)

<1300

Dust emission(g/m³)

≤0.1

Compressed air

Pressure(Pa)

(5-7)×105

 

 

Air consumption

3.6

5.4

6

7

8.3

9.5

 

(m³/min)

Pulse valve

Qty(pc)

12

18

20

24

28

32

Size

2-1/2″

Elevation valve

Qty(pc)

6

9

10

12

14

16

 

Size(mm)

Valve Φ725,air tank Φ100

Discharge device YJD-26

Outlet 300×300mm Capacity 24m³/h

Double flap valve 305×915

Screw conveyor

Model

Dia. Φ300,capacity 21m³/h

N/A

Gearbox

XWD2.2-5-1/43,power 2.2Kw

N/A

Air slide

Air slide 250mm,flow rate 2.0m³/m2,  Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered.

Bag size and material

Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/m2,temperature 120°C

Insulation area(m2)

125

196

205

223

247

262

Total weight(approx.)(Kg)

24120

31680

34680

43920

52680

60000

Note 1: Net filtration area means the area of one chamber during dust removing. 

      2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.

 

Model

PPC128-2×9

PPC128-2×10

PPC128-2×11

PPC128-2×12

PPC128-2×13

PPC128-2×14

Volume(m³/h)

201900

224300

247600

269100

291600

314000

Air speed(m/min)

1.2-2.0(Speed varies at different dust points)

Filtration area(m2)

2084

3115

3427

3738

4050

4361

Net filtration area(m2)

2648

2959

3271

3582

3894

4205

No. of bag(pc)

2304

2560

2816

3072

3328

3584

Resistance(Pa)

1470-1770

Minus pressure(Pa)

7000

Dust content at inlet(g/m³)

<1300

Dust emission(g/m³)

≤0.1

Compressed air

Pressure(Pa)

(5-7)×105

 

 

Air consumption

10.7

12

13.1

14.3

15.5

16.7

 

(m³/min)

Pulse valve

Qty(pc)

36

40

44

48

52

56

Size

2-1/2″

Elevation valve

Qty(pc)

18

20

22

24

26

28

 

Size(mm)

Valve Φ725,air tank Φ100

Discharge device YJD-26

Outlet300×300mm,Capacity 24m³/h

Double flap valve 305×915

Screw conveyor

Model

Dia. Φ300,capacity 21m³/h

N/A

Gearbox

XWD2.2-5-1/43,power 2.2Kw

N/A

Air slide

Air slide 250mm,flow rate 2.0m³/m2,  Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered.

Bag size and material

Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450gm2,temperature 120°C

Insulation area( m2)

277

292

307

322

337

352

Total weight(approx.)(Kg)

66480

72000

78480

86400

93600

100800

Note 1: Net filtration area means the area of one chamber during dust removing.  

         2: The compressed air consumption is based on supply of compressed air pipe from a air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.



Company information:

Henan Zhengzhou Mining Machinery Co., Ltd. was founded in 1956 and it is the designated manufacture plant of National Mechanical & Electrical Industry Bureau in Henan Province for cement building materials and beneficiation equipments. After more than half a century of development, Henan Zhengzhou Mining Machinery Co., Ltd has developed to an area of 70000 square meters, plant construction area of 40000 square meters with six modern workshops, two heavy machinery workshops, one Municipal Technology Center and more than 260 sets of machining, assembling, welding and other equipments. Its fixed asset value has exceeded 100 million RMB. Henan Zhengzhou Mining Machinery Co., Ltd has become an integrated modern enterprise with scientific research, design, development, manufacturing, sales, installation, commissioning and training services.The main products of company include: ball mill, rotary kiln, vertical preheater, cooler, crusher, metallurgical coke oven, magnetic separator, flotation machine, classifier, feeder, bucket elevator, preheater, dust collector, elevator, drier, and other equipments relate to metallurgy, cement, lime, mineral processing, refractory, chemical industry. The products of Henan Zhengzhou Mining Machinery Co., Ltd have been sold to every province of China and exported to Russia, Korea, Vietnam, Malaysia, Nepal, Bangladesh, Mexico, Armenia, Africa, South America and other countries and regions. 

Bag Filter Cement Plant Dust Collector for Mining


Packaging Detail :

The main machinery is in nude packing and spare parts in Wooden or steel box standard export packing, suitable for long distance delivery.

We can arrange the shipping to your door.
 

Bag Filter Cement Plant Dust Collector for Mining

FAQ:

Q: Are you manufacturer or trading company?

A: We are the professional manufacturer and exporter, 20 years production experience, 10 years export experience .

Q: Where is your factory located? How can I visit there?

A: Our factory is located in Qiaolou CaizhaiIndustiral Estate,Xingyang,Zhengzhou,China. Warmly welcome to visit us anytime.

Q: How do you control the quality?

A: We insist "Quality First, Customer First", always pay attention to quality control from the beginning to the end. One year warranty period, ISO9001:2008, CE, BV, SGS, ATEX Certificates. Alibaba golden credit supplier.

Q: How can I get the quotation?

A: Tell us the specifications, such as working situation, dust or fume characteristics, air volume(CFM), filter area(M2), inlet temperature(ºC), wind speed(M/min) etc. We will send the quotation within 24 hours. 

Q: How to pay for the product?

A: T/T, L/C, Western Union, Money Gram,Credit Card are available.

Q: How long is the delivery time?

A: About 5-40 days upon the payment.

Q: How about the after-sale installation of dust collector?

A: 1.We provide installation manual, technical consulting forever. Our engineers are available to help you install dust collector onsite.

     2.We also can provide installing turn-key projects overseas.

 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours